Trench Technology
NEW!
Katherm HK P
Article no.:
143614613132M1
Overview
- KaControl MC control system for operation via separate touch panel TP 2"
- Room group control of up to ten units via factory-fitted CAN-bus (up to 100 m)
- Demand-led automatic or optional manual fan control
- Freely configurable multifunctional inputs that can be used, for example, to detect temperatures, window contacts, presence detectors, card readers etc.
- Integrated Webserver (Wi-Fi or LAN) for ease of commissioning, parametrisation, trend data analysis etc. on a laptop or mobile device
Katherm HK units with primary air supply are perfectly suited to supply prepared primary air (fresh air) into a space, perfectly combining heating, cooling and a supply of fresh air.There are two primary air module versions available: fresh air supply through primary air modules with supply air connection or air supply through a pressurised floor. With both versions, the primary air volumetric flow emerges from the trench at a low-turbulence leaving air velocity. The amount of air supplied can be adjusted as required using air sliders.
The new modular parametric design of the Katherm HK P comprises three parts: connection, power and expansion module. Around 12,000 different versions are available for optimum adaptation to the space available along the facade and to maximum output, thanks to the new parametric approach 100 mm incremental dimensions of the power module.
The connection module contains the electrical junction and control box, the continuously variable EC fan motor, the water-side heat exchanger connection and the waste water-side condensate connection with optional condensate pump. Valve kits for 2-pipe and 4-pipe connection are also available on request. All electrical components are arranged and wired in the junction box The connection module thus combines all interfaces to the electrics, heating and waste water systems on one connection side and thus ensures straightforward and time-saving wiring and connection.
The new power module significantly increases the performance of the heat exchanger. A single high-performance drive motor drives a continuous string of tangential fans via a newly developed and innovative coupling system. This cascading prevents power losses due to empty spaces and ensures a uniform flow along the entire length of the convector. The use of fewer, but more powerful motors, reduces resource consumption, as well as energy costs and the susceptibility to errors in projects. Thus, the system offers a sustainable and powerful alternative to conventional solutions with several individual fans.
The newly designed Katherm HK maximises output with minimal noise by optimising the use of space within the floor. Depending on the model, the components are arranged efficiently: with 4-pipe models, the right-hand area of the trench is used for the additional heating mode valve connection, while with 2-pipe models, this area is reduced to a minimum. This flexible design enables the units to be tailor-made to conditions on site and ensures optimum use of every centimetre of the trench system.
The heat exchanger has a connecting internal thread and is secured with an anti-torsion device, which also acts as a splash guard during venting. We offer a wide range of pre-settable Open/Close valve kits and also differential pressure-independent valve kits for smaller or larger water flow rates with corrugated pipes. All models can be factory pre-equipped to save time, in which case only press-fit connections at the copper end piece of the corrugated pipe are required on site.
Each Katherm HK P features an integrated condensate tray for safe condensate drainage in cooling mode. Condensate is either drained along a natural gradient of using an optional condensate pump, which can be supplied separately or factory-fitted. There are significantly fewer individual components of the new condensate pump. In the new Katherm HK P, the float switch and condensate motor are accommodated in a compact housing. The unit is supplied with a newly designed connection bend to the condensate tray. This saves assembly time and makes it easier to install waste water and electrical systems. The condensate pump continuously adapts to the required power requirements and is extremely quiet. A plug-in power supply and error message for ease of maintenance are pre-installed.
The ready-wired junction and control box is design for fast and safe electrical wiring. A built-in cable duct ensures clean and safe cabling.
Calculate performance data
Sound power octave spectrum
The sound power is determined depending on the use according to DIN EN ISO 3741 (in the echo chamber), according to DIN EN ISO 3744 (in the low-reflective half-space) or according to DIN EN ISO 9614 (intensity method).
Oktave Spektrum
EPD data
Item number-specific LCA data based on verified EPD according to EN 15804, which is available for download at The International EPD System. Separate subdivision of life cycle modules available online via button "EPD data sheet". The environmental impacts of module B refer to 1 year of operation. A: Product and construction process stage - B: Use stage - C: End of life stage - D: Benefits and loads beyond the system boundary
| A | B | C | D | |
|---|---|---|---|---|
| GWP - Total kg CO2 eq | 1.25E+02 | 9.00E+00 | 4.61E+00 | -5.30E+01 |
| GWP - fossil kg CO2 eq | 1.28E+02 | 8.03E+00 | 4.61E+00 | -5.25E+01 |
| GWP - Biogenic kg CO2 eq | -3.25E+00 | 9.39E-01 | 1.81E-03 | -2.55E-02 |
| GWP - Luluc kg CO2 eq | 5.61E-01 | 3.10E-02 | 2.26E-04 | -3.81E-01 |
| ODP kg CFC-11 eq | 7.19E-06 | 5.42E-07 | 9.06E-08 | -3.54E-06 |
| AP mol H+ eq | 1.34E+00 | 6.51E-02 | 1.88E-03 | -7.69E-01 |
| EP - fresh water kg P eq | 1.12E-01 | 5.53E-03 | 5.94E-05 | -6.38E-02 |
| EP - marine kg P eq | 1.50E-01 | 7.61E-03 | 6.35E-04 | -6.56E-02 |
| EP - country mol N eq | 1.66E+00 | 8.99E-02 | 7.29E-03 | -7.62E-01 |
| POCP kg NMVOC | 4.90E-01 | 2.25E-02 | 1.60E-03 | -2.21E-01 |
| ADPE kg Sb eq | 1.92E-02 | 1.84E-03 | 1.43E-06 | -1.46E-02 |
| ADPF MJ | 1.60E+03 | 1.99E+02 | 4.69E+00 | -6.47E+02 |
| WDP m³ depriv. | 3.68E+01 | 1.28E+00 | 1.44E-01 | -1.14E+01 |
| GWP-GHG kg CO2 eq | 1.26E+02 | 7.97E+00 | 4.61E+00 | -5.10E+01 |
| PM disease inc. | 9.84E-06 | 2.34E-07 | 2.85E-08 | -3.99E-06 |
| IR kBq U-235 eq | 1.33E+01 | 6.56E+00 | 2.73E-02 | -5.60E+00 |
| ETP - FW CTUe | 8.04E+03 | 4.37E+02 | 1.92E+01 | -5.63E+03 |
| HTP - C CTUh | 7.50E-07 | 1.53E-08 | 6.08E-10 | -2.99E-07 |
| HTP - NC CTUh | 1.30E-05 | 6.34E-07 | 9.77E-09 | -8.79E-06 |
| SQP - | 1.08E+03 | 8.80E+01 | 6.68E+00 | -3.08E+02 |
| PERE MJ | 3.74E+02 | 3.68E+01 | 1.53E-01 | -1.24E+02 |
| PERM MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| PERT MJ | 3.74E+02 | 3.68E+01 | 1.53E-01 | -1.24E+02 |
| PENRE MJ | 1.60E+03 | 1.99E+02 | 4.69E+00 | -6.47E+02 |
| PENRM MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| PENRT MJ | 1.60E+03 | 1.99E+02 | 4.69E+00 | -6.47E+02 |
| SM kg | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| RSF MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| NRSF MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| FW m³ | 7.67E-01 | 8.02E-02 | 5.91E-03 | -3.59E-01 |
| HWD kg | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| NHWD kg | 6.43E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| RWD kg | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| CRU kg | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| MFR kg | 0.00E+00 | 0.00E+00 | 1.95E+01 | 0.00E+00 |
| MER kg | 0.00E+00 | 0.00E+00 | 1.54E+00 | 0.00E+00 |
| EE (Electrical) MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| EE (Thermal) MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
Accessories
Control accessories KaControl MC
Touch Panel TP 2
Touch display with clear visualisations, black screen border and white case, 24 V, Room control unit for installation in a flush-mounted box with a freely selectable 55x55 mm frame, Protection class IP 20, made of Glass and PVC
Suitable for: All units with control configuration KaControl MC1 and MC2
Suitable for: All units with control configuration KaControl MC1 and MC2
Article no.:
196003311101
Modbus TCP licence ex-works
Licence for activation of the Modbus TCP interface ex-works, Hardware for use of the interface is installed and activated
Suitable for: all units with control option KaControl MC
Suitable for: all units with control option KaControl MC
Article no.:
196003361103
Modbus RTU licence ex-works
Licence for activation of the Modbus RTU interface ex-works, Hardware for use of the interface is installed and activated
Suitable for: all units with control option KaControl MC
Suitable for: all units with control option KaControl MC
Article no.:
196003361102
BACnet/IP licence ex-works
Licence for activation of the BACnet/IP interface ex-works, Hardware for use of the interface is installed and activated
Suitable for: all units with control option KaControl MC
Suitable for: all units with control option KaControl MC
Article no.:
196003361104
KNX licence ex-works
Licence for activation of the KNX interface ex-works, Hardware for use of the interface is installed and activated
Suitable for: all units with control option KaControl MC
Suitable for: all units with control option KaControl MC
Article no.:
196003361101
Surface-mounted housing
Complete with cover frame, Surface-mounted, Colour RAL 9010 gloss pure white, made of Thermoplastic, Type 3304111
Suitable for: Touch Panel TP 2
Suitable for: Touch Panel TP 2
Article no.:
196003304111
Surface-mounted housing
Complete with cover frame, Surface-mounted, Colour RAL 9005 matt satin deep black, made of Thermoplastic, Type 3304112
Suitable for: Touch Panel TP 2
Suitable for: Touch Panel TP 2
Article no.:
196003304112
room temperature sensor
to detect the room temperature., Surface-mounted, Protection class IP 20, Colour RAL 9010 pure white, made of Polycarbonat, Type 3321111
Suitable for: all units with control option KaControl MC
Suitable for: all units with control option KaControl MC
Article no.:
196003321111
Valve kits
Differential pressure-independent valve kit
4-pipe, includes 2 DDU straight valves, 2 return shut-off valves, angled and straight, 4 flexible stainless steel corrugated pipes, 2 elbows, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm HK, Min. Flow volume 105 l/h, max. Flow volume 1050 l/h, DN 15
Suitable for: Katherm HK, Min. Flow volume 105 l/h, max. Flow volume 1050 l/h, DN 15
Article no.:
194001433941
Differential pressure-independent valve kit
4-pipe, includes 2 DDU valvesl, axial and straight, 2 return shut-off valves, angled and straight, 4 flexible stainless steel corrugated pipes, 2 elbows, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm HK, Min. Flow volume 35 l/h, max. Flow volume 420 l/h, DN 15
Suitable for: Katherm HK, Min. Flow volume 35 l/h, max. Flow volume 420 l/h, DN 15
Article no.:
194001433541
Pre-settable valve kit
4-pipe, includes 2 valves, axial and straight, 2 return shut-off valves, angled and straight, 4 flexible stainless steel corrugated pipes, 2 elbows, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm HK, max. Flow volume 920 l/h, DN 15
Suitable for: Katherm HK, max. Flow volume 920 l/h, DN 15
Article no.:
194001433741
Pre-settable valve kit
4-pipe, includes 2 valves, axial and straight, 2 return shut-off valves, angled and straight, 4 flexible stainless steel corrugated pipes, 2 elbows, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm HK, max. Flow volume 260 l/h, DN 15
Suitable for: Katherm HK, max. Flow volume 260 l/h, DN 15
Article no.:
194001433141
Valve actuators, supplied loose
valve actuator
Drive T, 24 V AC/DC, 2-point, normally closed, 0.5m connecting line-MB2, PVC, VA10N, 1 W, Protection class III, Protection class IP 54 Cable length 0.12 m, supplied separately, made of Polyamide
Suitable for: All units with electro-mechanical control configuration KaControl MC1, KaControl C1 in conjunction with 2-way valve or differential pressure-independent valve
Suitable for: All units with electro-mechanical control configuration KaControl MC1, KaControl C1 in conjunction with 2-way valve or differential pressure-independent valve
Article no.:
196TS0P240500AB
Valves and return shut-off valves
Pre-settable thermostatic valve
Axial, pre-settable, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 260 l/h, DN 15
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 260 l/h, DN 15
Article no.:
194000346911
Pre-settable thermostatic valve
Axial, pre-settable, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 920 l/h, DN 15
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 920 l/h, DN 15
Article no.:
194000346914
Pre-settable thermostatic valve
straight, pre-settable, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 260 l/h, DN 15
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 260 l/h, DN 15
Article no.:
194000346909
Pre-setting key
Once per project necessary.
Suitable for: pre-settable valve bodies, valve kits and convector connection kit
Suitable for: pre-settable valve bodies, valve kits and convector connection kit
Article no.:
194000346915
Pre-setting set
Once per project necessary.
Suitable for: pre-settable valve bodies and valve kits with higher flow from 250 l/h
Suitable for: pre-settable valve bodies and valve kits with higher flow from 250 l/h
Article no.:
194000346916
Return shut-off valve
2- and 4-pipe, Straight, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 610 l/h, DN 15
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 610 l/h, DN 15
Article no.:
194000145952
Return shut-off valve
2- and 4-pipe, angled, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 610 l/h, DN 15
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 610 l/h, DN 15
Article no.:
194000145953
Return shut-off valve
2- and 4-pipe, Straight, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 920 l/h, DN 15
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 920 l/h, DN 15
Article no.:
194000145954
Return shut-off valve
2- and 4-pipe, angled, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 920 l/h, DN 15
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 920 l/h, DN 15
Article no.:
194000145955
Differential pressure-independent thermostatic valve
Axial shape, differential pressure-dependent, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm NK, Katherm QK or Katherm HK, Min. Flow volume 35 l/h, max. Flow volume 420 l/h, DN 15
Suitable for: Katherm NK, Katherm QK or Katherm HK, Min. Flow volume 35 l/h, max. Flow volume 420 l/h, DN 15
Article no.:
194000347914
Differential pressure-independent thermostatic valve
Straight, differential pressure-independent, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm NK, Katherm QK or Katherm HK, Min. Flow volume 35 l/h, max. Flow volume 420 l/h, DN 15
Suitable for: Katherm NK, Katherm QK or Katherm HK, Min. Flow volume 35 l/h, max. Flow volume 420 l/h, DN 15
Article no.:
194000347913
Differential pressure-independent thermostatic valve
Straight, differential pressure-independent, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm NK, Katherm QK or Katherm HK, Min. Flow volume 105 l/h, max. Flow volume 1050 l/h, DN 15
Suitable for: Katherm NK, Katherm QK or Katherm HK, Min. Flow volume 105 l/h, max. Flow volume 1050 l/h, DN 15
Article no.:
194000347915
Pre-settable thermostatic valve
straight, pre-settable, Connection 1/2 inch, Max. operating pressure 10 bar, supplied separately
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 920 l/h, DN 15
Suitable for: Katherm NK, Katherm QK or Katherm HK, max. Flow volume 920 l/h, DN 15
Article no.:
194000346918
Filter
Filter for air inlet
2- and 4-pipe, Replacement filter without frame, ISO Coarse 30% filter (G2)
Suitable for: Katherm HK 290 or Katherm HK 310 P, Length 1340 - 2180 mm
Suitable for: Katherm HK 290 or Katherm HK 310 P, Length 1340 - 2180 mm
Article no.:
143014349012
Condensate tray/pump
fitting kit for natural condensate drain
supplied separately
Suitable for: Katherm HK
Suitable for: Katherm HK
Article no.:
194000143817
fitting kit for natural condensate drain
factory-fitted
Suitable for: Katherm HK
Suitable for: Katherm HK
Article no.:
194000143818
Connection kit for condensation pump
100 - 240 V AC, 6 W, Protection class IP 44, supplied separately
Suitable for: Katherm HK or Katherm HK P, Width 290 mm and 310 mm
Suitable for: Katherm HK or Katherm HK P, Width 290 mm and 310 mm
Article no.:
194000143840
Connection kit for condensation pump
100 - 240 V AC, 6 W, Protection class IP 44, factory-fitted
Suitable for: Katherm HK or Katherm HK P, Width 290 mm and 310 mm
Suitable for: Katherm HK or Katherm HK P, Width 290 mm and 310 mm
Article no.:
194000143841
Installation covers
Installation cover
to protect trench during installation, factory-fitted, grilles are packed separately
price per m
Suitable for: Katherm HK 310 P
price per m
Suitable for: Katherm HK 310 P
Article no.:
194000100310
Galvanised steel components
1x Primary air module
with air spigot and air slider, includes primary air spigot with air volume slider mounted on the underfloor convector for each connection module
Suitable for: Number of connecting pieces 1 piece(s), Katherm HK P Trench Technology, DN 80
Suitable for: Number of connecting pieces 1 piece(s), Katherm HK P Trench Technology, DN 80
Article no.:
1430143500310
2x Primary air module
with air spigot and air slider, includes primary air spigot with air volume slider mounted on the underfloor convector for each connection module
Suitable for: Number of connecting pieces 2 piece(s), Katherm HK P Trench Technology, DN 80
Suitable for: Number of connecting pieces 2 piece(s), Katherm HK P Trench Technology, DN 80
Article no.:
1430143500311
3x Primary air module
with air spigot and air slider, includes primary air spigot with air volume slider mounted on the underfloor convector for each connection module
Suitable for: Number of connecting pieces 3 piece(s), Katherm HK P Trench Technology, DN 80
Suitable for: Number of connecting pieces 3 piece(s), Katherm HK P Trench Technology, DN 80
Article no.:
1430143500312
4x Primary air module
with air spigot and air slider, includes primary air spigot with air volume slider mounted on the underfloor convector for each connection module
Suitable for: Number of connecting pieces 4 piece(s), Katherm HK P Trench Technology, DN 80
Suitable for: Number of connecting pieces 4 piece(s), Katherm HK P Trench Technology, DN 80
Article no.:
1430143500313
5x Primary air module
with air spigot and air slider, includes primary air spigot with air volume slider mounted on the underfloor convector for each connection module
Suitable for: Number of connecting pieces 5 piece(s), Katherm HK P Trench Technology, DN 80
Suitable for: Number of connecting pieces 5 piece(s), Katherm HK P Trench Technology, DN 80
Article no.:
1430143500314
Surcharges for grille versions
Surcharge for stainless steel grille version (€/m)
Bar depth 6 mm, Bar height 18 mm, Bar spacing 10.5 mm, Free area, approx. 65 %
Suitable for: Stainless steel, polished , Katherm HK
Suitable for: Stainless steel, polished , Katherm HK
Article no.:
143014313261
Downloads
Declarations/Certificates
Certificate ISO 9001, 14001, 50001
PDF
(116 kB)
General product information
Products
PDF
(10.7 MB)
Manuals
KaControl MC - Multi Connect Climate Control Quick Start Guide
PDF
(1.3 MB)
Katherm HK trench heating
PDF
(7.7 MB)
Katherm HK, brief instructions
PDF
(7.9 MB)
Technical catalogues
Katherm HK trench heating
PDF
(18 MB)
KaControl MC - Multi Connect
PDF
(2.2 MB)
CAD-Drawings
Katherm HKP, Kanalbreite 310 mm, Kanalhöhe 180 mm, 4-Leiter, Rostart Roll-Rost, Abmessungen [Inch], PDF
PDF
(536 kB)
Katherm HKP, Kanalbreite 310 mm, Kanalhöhe 180 mm, 4-Leiter, Rostart Roll-Rost, Abmessungen [mm], PDF
PDF
(559 kB)
Katherm HKP, Kanalbreite 310 mm, Kanalhöhe 180 mm, 4-Leiter, Rostart Roll-Rost, Abmessungen [Inch], DWG
DWG
(1.4 MB)
Katherm HKP, Kanalbreite 310 mm, Kanalhöhe 180 mm, 4-Leiter, Rostart Roll-Rost, Abmessungen [mm], DWG
DWG
(1.4 MB)