Unit Heaters
TOP
Article no.:
153000473156
Overview
Its robust and durable steel construction enables dirty heating elements to be cleaned using high-pressure cleaners or compressed air without the risk of damaging the heat exchanger.
- Suitable for LPHW and thermal oil.
- Galvanised elliptical core pipe.
- Galvanised steel slats.
- Permanent corrosion protection through galvanising.
- Suitable for continuous operating pressures up to 16 bar, 120 °C.
High-pressure versions and versions for temperatures above 120 °C are available on request.
- Continuously variable EC single-phase whisper-quiet sickle-blade fan (see Fig.)
- Highly efficient due to the aerodynamic design of the rotor housing
- Motor protection class IP 54
- Optional 2-stage wide-blade fan with explosion-proof AC external rotor motor (IP 44)
- Copper-aluminium heat exchanger (see Fig.), extremely lightweight, with high heat outputs and low dimensions, suitable for low temperature heating systems and LPHW heating systems, steel header and manifold
- Steel heat exchanger, galvanised, robust and durable
- Steel heat exchanger, galvanised steel, cross-counterflow, particularly suitable for high water temperature spreads
- Steel heat exchanger, galvanised, for steam
Ultra-efficient as a component in a hybrid system: while the TOP has decentralised temperature control, an air handling unit with small dimensions deals with ventilation and heat recovery. This saves operating costs as all components only work when demand is detected. And you benefit from the reduced size of the air handling unit in terms of investment and installation.
It is operated for example using a thermostat, KaControl Touch Panel or by linking it into the building automation via Modbus, KNX, or BACnet.
However you plan to heat, TOP unit heaters do the job with the suitable heat exchanger. Copper/aluminium or galvanised steel for PWW/PHW (for low temperature operation as well), cross-counterflow heat exchanger with large temperature spreads, and on request, with a special version for steam.
Accessories
Control accessories electromechanical 230 V
Room thermostat
Heating/Cooling, 2- and 4-pipe, 3-stage. Only in conjunction with valves/valve kits with actuator, with OFF/Manual/Automatic fan switchover, 230 V AC, Open/Closed, Surface-mounted, Protection class II, Protection class IP 30, Temperature setting range 5 - 30 °C, Colour similar to RAL 9010 pure white, Type 30155
optional connectible, remote sensor art. no. 196000148921
can optionally be connected, clip-on sensor art. no. 196000148922
Suitable for: EC units electromechanical, 5 Katherm HK Trench Technology, 5 TOP, Ultra or Ultra Allround Unit Heaters, 5 Venkon or PowerKon LT Fan Coils, 5 KaCool D AF, KaCool W or KaDeck Fan Coils
optional connectible, remote sensor art. no. 196000148921
can optionally be connected, clip-on sensor art. no. 196000148922
Suitable for: EC units electromechanical, 5 Katherm HK Trench Technology, 5 TOP, Ultra or Ultra Allround Unit Heaters, 5 Venkon or PowerKon LT Fan Coils, 5 KaCool D AF, KaCool W or KaDeck Fan Coils
Article no.:
196000030155
Clock thermostat
Heating/Cooling, 2- and 4-pipe, continuous fan control, with LCD operating menu and integrated timer program, 230 V AC, 1 W, flush-mounted, Protection class II, Protection class IP 30, Colour similar to RAL 9010 pure white, Type 30256
optional connectible, remote sensor art. no. 196000148921
can optionally be connected, clip-on sensor art. no. 196000148922
Suitable for: EC units electromechanical, 5 TOP, Ultra or Ultra Allround Unit Heaters, 5 Venkon Fan Coils, 5 KaCool D AF, KaCool W or KaDeck Fan Coils
optional connectible, remote sensor art. no. 196000148921
can optionally be connected, clip-on sensor art. no. 196000148922
Suitable for: EC units electromechanical, 5 TOP, Ultra or Ultra Allround Unit Heaters, 5 Venkon Fan Coils, 5 KaCool D AF, KaCool W or KaDeck Fan Coils
Article no.:
196000030256
Speed controller
continuously variable fan operation, 0-100% presettable, On/Off via room thermostat, surface-mounted protection class IP 54, flush-mounted protection class IP 44, 230 V AC, 0-100%, Surface-mounted, Protection class IP 54, Colour similar to RAL 9010 pure white, made of plastic, Type 30510
Suitable for: EC units electromechanical, 2 ProtecTor Door Air Curtains, 5 UniLine or Tandem Door Air Curtains, 10 TOP or Ultra Unit Heaters, 10 Venkon Fan Coils, 2 KaCool D AF or KaCool W AC Fan Coils
Suitable for: EC units electromechanical, 2 ProtecTor Door Air Curtains, 5 UniLine or Tandem Door Air Curtains, 10 TOP or Ultra Unit Heaters, 10 Venkon Fan Coils, 2 KaCool D AF or KaCool W AC Fan Coils
Article no.:
196000030510
Electronic speed controller
microprocessor-controlled control with integrated digital timer, with day, night, week programme, continuously variable fan operation 0 to 100 %, manual or automatic, 0-10 VDC, recirculation air, 230 V AC, Protection class I, Protection class IP 40, including sensor IP 66, Type 30515
Suitable for: EC units electromechanical, 10 TIP, TOP or Ultra Unit Heaters, 10 Venkon Fan Coils, 5 KaCool D AF or KaCool W Fan Coils
Suitable for: EC units electromechanical, 10 TIP, TOP or Ultra Unit Heaters, 10 Venkon Fan Coils, 5 KaCool D AF or KaCool W Fan Coils
Article no.:
196000030515
Switching and control units – Mixed air / fresh air, electro-mechanical
Servomotor
can be reversed, 230 V Open/Closed, Protection class IP 54, Type 30262
Suitable for: KaMAX
Suitable for: KaMAX
Article no.:
196000030262
Thermostats
Room thermostat
with thermal feedback, 230 V AC, Surface-mounted, Protection class IP 30, Temperature setting range 5 - 30 °C, Colour similar to RAL 9010 pure white, Type 30055
Suitable for: Unit Heaters
Suitable for: Unit Heaters
Article no.:
196000030055
Industrial thermostat
with setpoint adjustment by tool, with setpoint adjustment by tool, Protection class I, Protection class IP 54, Temperature setting range 5 - 30 °C, Type 30058
Suitable for: ProtecTor Door Air Curtains, Unit Heaters
Suitable for: ProtecTor Door Air Curtains, Unit Heaters
Article no.:
196000030058
Industrial thermostat
with setpoint adjustment using a dial, with setpoint adjustment using a dial, Protection class I, Protection class IP 54, Temperature setting range 40 °C, Type 30059
Suitable for: ProtecTor Door Air Curtains, Unit Heaters
Suitable for: ProtecTor Door Air Curtains, Unit Heaters
Article no.:
196000030059
Clock thermostat
with integral digital timer, with day/night/week programme, with night setback, Protection class IP 20, Temperature setting range 5 - 40 °C, Colour similar to RAL 9010 pure white, Type 30056
Suitable for: Unit Heaters
Suitable for: Unit Heaters
Article no.:
196000030056
Valve kits
Thermoelectric shut-off valve
as a straight valve body with thermoelectric actuator 230 V / 50 Hz, Connection 1 1/2'' kvs value 10 m³/h, Type 31913
Not in conjunction with 2-stage three-phase switch art. no. 196000030049!
Suitable for: all unit heaters
Not in conjunction with 2-stage three-phase switch art. no. 196000030049!
Suitable for: all unit heaters
Article no.:
153000031913
Control shut-off valve
with reducer 1 1/4 inch x 1 1/2 inch m/f, for automatic flow and temperature control, kvs value 8.4 m³/h, Type 31952
Suitable for: Model size 6 - 8, TOP Unit Heaters, Min. Flow volume 600 l/h, max. Flow volume 4800 l/h, DN 32
Suitable for: Model size 6 - 8, TOP Unit Heaters, Min. Flow volume 600 l/h, max. Flow volume 4800 l/h, DN 32
Article no.:
153000031952
Valve actuator kits
Valve actuator kit
Drive T, 230 V AC, 2-point, normally closed, 3 m connecting cable-AEH, PVC, VA10N, 1 W, Protection class II, Protection class IP 54, Cable length 0.12 m, supplied separately, made of Polyamide
Article no.:
1960TS3P02050010B
Valves
Unit heater shut-off set, angled version
Connection 1 1/2'' Max. operating pressure 10 bar, Type 37976
Suitable for: Model size 7
Suitable for: Model size 7
Article no.:
198000037976
Unit heater shut-off set, straight version
Connection 1 1/2'' Max. operating pressure 10 bar, Type 37977
Suitable for: Model size 7
Suitable for: Model size 7
Article no.:
198000037977
Repair switch
Repair switch
Enables individual units in a switching group to be decommissioned by voltage disconnection. The thermal contacts are bridged in advance, and subsequently opened on the motor side so that the other units in the group can continue to operate without interruption., EC, Protection class IP 65, 25 A, supplied separately, Type 30160
Suitable for: all unit heaters, air curtains with EC-motors
Suitable for: all unit heaters, air curtains with EC-motors
Article no.:
196000030160
Air outlets
calculation-relevant accessory
KaMAX
calculation-relevant accessory
Multi Air MiX for ceiling-mounted units, manual level adjustment
Suitable for: Model size 7
Suitable for: Model size 7
Article no.:
198000037111
KaMAX Open-Stop-Close switch
for electrically actuated continuously variable manual adjustment of the KaMAX louvre
Article no.:
196000030115
Louvre
two-row for wall- and ceiling-mounted units
Suitable for: Model size 7
Suitable for: Model size 7
Article no.:
198000037002
Induction air outlet louvre
calculation-relevant accessory
mainly used for wall-mounted units, for ceiling-mounted units with ceiling heights of more than 4.0 m
Suitable for: Model size 7
Suitable for: Model size 7
Article no.:
198000037101
Diffuser
calculation-relevant accessory
in four directions, for ceiling-mounted units
Suitable for: Model size 7
Suitable for: Model size 7
Article no.:
198000037004
Outlet nozzle
calculation-relevant accessory
for ceiling-mounted units, especially for high-ceilinged buildings, sendzimir galvanised
Suitable for: Model size 7
Suitable for: Model size 7
Article no.:
198000037006
Brackets
Universal 2-point brackets
recirculating air only, 1 complete set
Suitable for: Model size 4 - 7
Suitable for: Model size 4 - 7
Article no.:
198000030041
Universal 4-point brackets
recirculating air only, made of sendzimir galvanised sheet steel, as a 4-point fixing for ceiling installation, 1 complete set
Suitable for: Model size 4 - 7
Suitable for: Model size 4 - 7
Article no.:
198000030042
Universal 2-point T-support brackets
recirculating air only, Ceiling-mounted
Suitable for: Model size 4 - 7
Suitable for: Model size 4 - 7
Article no.:
198000030047
Wall brackets
recirculating air only, made of sendzimir galvanised sheet steel for wall mounting, a complete set
TIP and TOP unit heaters can be installed standing and also suspended.
price for 1 complete set
Suitable for: Model size 7
TIP and TOP unit heaters can be installed standing and also suspended.
price for 1 complete set
Suitable for: Model size 7
Article no.:
198000037044
Ceiling-wall brackets
for ceiling or wall mounting, consisting of 2 multi-edged brackets with slotted holes and screws
price for 1 complete set
Suitable for: Model size 7
price for 1 complete set
Suitable for: Model size 7
Article no.:
198000037049
Downloads
Declarations/Certificates
Certificate ISO 50001:2018
PDF
(194 kB)
Certificate ISO 9001:2008
PDF
(118 kB)
UKCA Declaration Unit Heater
PDF
(450 kB)
ErP Data Sheet for TOP unit heaters
PDF
(234 kB)
Cross-product information
Products
PDF
(10.7 MB)
Manuals
KaControl for Airblock KG
PDF
(34.1 MB)
TOP unit heaters
PDF
(7.7 MB)
TOP unit heaters, brief instructions
PDF
(4.1 MB)
Technical catalogues
TOP unit heaters
PDF
(18.7 MB)
BIM data (Building Information Modeling)
Kampmann Group BIM data
CAD-Drawings
TOP unit heater, model 4 - 7, galvanised steel heat exchanger [mm]
PDF
(351 kB)
TOP unit heaters, model size 4 - 7, heat exchanger model galvanised steel [Inch]
PDF
(306 kB)
TOP unit heaters, model size 4 - 7, heat exchanger model galvanised steel [Inch]
DWG
(1.5 MB)
TOP unit heater, model 4 - 7, galvanised steel heat exchanger [mm]
DWG
(2.4 MB)
TOP unit heaters, model size 4 - 7, heat exchanger model galvanised steel [Inch]
DXF
(11.4 MB)
TOP unit heater, model 4 - 7, galvanised steel heat exchanger [mm]
DXF
(18.2 MB)
Installation plans
TOP, electromechanical control version
PDF
(1.1 MB)