Trench Technology
Katherm NK
Article no.:
145190913343
Overview
Primary air or fresh air is introduced into the rooms through special supply air ducts. The Katherm supply air module ZL is available for all trench systems. It is a trench, which can be fitted to all designs of Katherm units.
- For stable installation within screeded and raised floors (standard)
- To allow continuous grille appearance
- As visual cover and protection against ingress of dirt
- To match grille finish
- With sound installation for simple fixing of the floor trench
The Eurokonus valve connection enables the Katherm NK to be quickly and easily installed on site. In addition, height adjustment feet and raised floor height adjustment feet are supplied as standard to further reduce the installation time and thus the cost.
Calculate performance data
EPD data
Item number-specific LCA data based on verified EPD according to EN 15804, which is available for download at The International EPD System. Separate subdivision of life cycle modules available online via button "EPD data sheet". The environmental impacts of module B refer to 1 year of operation. A: Product and construction process stage - B: Use stage - C: End of life stage - D: Benefits and loads beyond the system boundary
| A | B | C | D | |
|---|---|---|---|---|
| GWP - Total kg CO2 eq | 1.08E+02 | 1.29E+00 | 1.65E+00 | -2.78E+01 |
| GWP - fossil kg CO2 eq | 1.09E+02 | 1.23E+00 | 1.65E+00 | -2.75E+01 |
| GWP - Biogenic kg CO2 eq | -9.74E-01 | 1.60E-02 | 6.66E-04 | -1.12E-02 |
| GWP - Luluc kg CO2 eq | 3.37E-01 | 3.59E-02 | 7.03E-05 | -1.49E-01 |
| ODP kg CFC-11 eq | 6.68E-06 | 8.63E-08 | 3.16E-08 | -1.67E-06 |
| AP mol H+ eq | 4.89E+00 | 5.16E-02 | 7.57E-04 | -4.00E-01 |
| EP - fresh water kg P eq | 3.95E-01 | 4.05E-03 | 1.77E-05 | -3.40E-02 |
| EP - marine kg P eq | 2.82E-01 | 3.18E-03 | 2.59E-04 | -3.48E-02 |
| EP - country mol N eq | 3.72E+00 | 4.01E-02 | 2.80E-03 | -4.11E-01 |
| POCP kg NMVOC | 9.48E-01 | 9.93E-03 | 6.76E-04 | -1.18E-01 |
| ADPE kg Sb eq | 1.17E-01 | 1.22E-03 | 3.42E-07 | -7.48E-03 |
| ADPF MJ | 1.36E+03 | 2.04E+01 | 2.20E+00 | -3.27E+02 |
| WDP m³ depriv. | 8.99E+01 | 1.05E+00 | 4.59E-02 | -6.37E+00 |
| GWP-GHG kg CO2 eq | 1.07E+02 | 1.24E+00 | 1.65E+00 | -2.66E+01 |
| PM disease inc. | 1.29E-05 | 1.26E-07 | 1.43E-08 | -2.09E-06 |
| IR kBq U-235 eq | 1.20E+01 | 4.05E-01 | 1.08E-02 | -2.43E+00 |
| ETP - FW CTUe | 3.98E+04 | 4.18E+02 | 2.18E+00 | -3.08E+03 |
| HTP - C CTUh | 1.09E-06 | 9.64E-09 | 2.50E-10 | -1.64E-07 |
| HTP - NC CTUh | 6.40E-05 | 6.68E-07 | 2.83E-09 | -4.65E-06 |
| SQP - | 2.13E+03 | 2.61E+01 | 3.68E+00 | -1.66E+02 |
| PERE MJ | 3.16E+02 | 4.79E+00 | 3.55E-02 | -5.23E+01 |
| PERM MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| PERT MJ | 3.16E+02 | 4.79E+00 | 3.55E-02 | -5.23E+01 |
| PENRE MJ | 1.36E+03 | 2.04E+01 | 2.20E+00 | -3.27E+02 |
| PENRM MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| PENRT MJ | 1.36E+03 | 2.04E+01 | 2.20E+00 | -3.27E+02 |
| SM kg | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| RSF MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| NRSF MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| FW m³ | 2.66E+00 | 3.56E-02 | 2.04E-03 | -2.33E-01 |
| HWD kg | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| NHWD kg | 3.70E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| RWD kg | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| CRU kg | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| MFR kg | 0.00E+00 | 0.00E+00 | 1.13E+01 | 0.00E+00 |
| MER kg | 0.00E+00 | 0.00E+00 | 5.91E-01 | 0.00E+00 |
| EE (Electrical) MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| EE (Thermal) MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
Accessories
Thermostats
Room thermostat
with thermal feedback, 230 V, AC, Surface-mounted, Protection class IP 30, Temperature setting range 5 - 35 °C, Colour white, Type 146904
Suitable for: Katherm NK, PowerKon + F, PowerKon + W or Steel convector
Suitable for: Katherm NK, PowerKon + F, PowerKon + W or Steel convector
Article no.:
194000146904
Room thermostat
with thermal feedback, 230 V AC, AC, flush-mounted, Protection class II, Protection class IP 30, Temperature setting range 5 - 30 °C, Colour alpine white, Type 146927
Suitable for: Jung system, Katherm NK, PowerKon + F, PowerKon + W or Steel convector
Suitable for: Jung system, Katherm NK, PowerKon + F, PowerKon + W or Steel convector
Article no.:
194000146927
Clock thermostat
with day/night/week programme, 230 V, AC, Surface-mounted, Protection class IP 20, Temperature setting range 10 - 30 °C, Colour white, Type 146910
Suitable for: Katherm NK, PowerKon + F, PowerKon + W or Steel convector
Suitable for: Katherm NK, PowerKon + F, PowerKon + W or Steel convector
Article no.:
194000146910
Clock thermostat
230 V, AC, flush-mounted, Protection class IP 30, Temperature setting range 5 - 30 °C, Colour white, Type 146933
Suitable for: Katherm NK, PowerKon + F, PowerKon + W or Steel convector
Suitable for: Katherm NK, PowerKon + F, PowerKon + W or Steel convector
Article no.:
194000146933
Valve kits
Valve kit
Includes 1x pre-settable axial valve, 1x return shut-off valve, straight, Max. operating pressure 10 bar
Suitable for: Katherm NK Trench Technology, DN 15
Suitable for: Katherm NK Trench Technology, DN 15
Article no.:
194000145967
Valve kit
Includes 1x pre-settable valve, straight, 1x return shut-off valve, straight, Max. operating pressure 10 bar
Suitable for: Katherm NK Trench Technology, DN 15
Suitable for: Katherm NK Trench Technology, DN 15
Article no.:
194000145968
Valve actuators, supplied loose
Valve actuator kit
Drive T, 24 V AC/DC, 2-point, normally closed, 0.5m connecting line-AEH, PVC, VA10N, 1 W, Protection class III, Protection class IP 54, Cable length 0.12 m, supplied separately, made of Polyamide
Suitable for: All units with electro-mechanical control configuration KaControl C1 in conjunction with 2-way valve or differential pressure-independent valve
Suitable for: All units with electro-mechanical control configuration KaControl C1 in conjunction with 2-way valve or differential pressure-independent valve
Article no.:
1960TS0P04050010B
Valve actuator kit
Drive T, 230 V AC, 2-point, normally closed, 0.5m connecting line-AEH, PVC, VA10N, 1 W, Protection class II, Protection class IP 54, Cable length 0.12 m, supplied separately, made of Polyamide
Suitable for: All units with electro-mechanical control configuration in conjunction with 2-way valve or differential pressure-independent valve
Suitable for: All units with electro-mechanical control configuration in conjunction with 2-way valve or differential pressure-independent valve
Article no.:
1960TS0P02050010B
Valves and return shut-off valves
Pre-adjustable valve kit
Axial, pre-settable, Connection 1/2'', Max. operating pressure 10 bar
Suitable for: Katherm NK 137/182, Katherm QK, Katherm HK, Katherm HK, DN 15
Suitable for: Katherm NK 137/182, Katherm QK, Katherm HK, Katherm HK, DN 15
Article no.:
194000346911
Pre-adjustable valve kit
straight, pre-settable, Connection 1/2'', kvs value 1 m³/h, Max. operating pressure 10 bar
Suitable for: Katherm NK 182 (trench heights 150 mm and 200 mm), Katherm NK 232/300/380 (all trench heights), Katherm QK, DN 15
Suitable for: Katherm NK 182 (trench heights 150 mm and 200 mm), Katherm NK 232/300/380 (all trench heights), Katherm QK, DN 15
Article no.:
194000346909
Pre-setting key
Once per project necessary.
Suitable for: pre-settable valve bodies, valve kits and convector connection kit
Suitable for: pre-settable valve bodies, valve kits and convector connection kit
Article no.:
194000346915
Return shut-off valve
Straight, Connection 1/2''
Suitable for: Katherm NK, Katherm QK or Katherm HK
Suitable for: Katherm NK, Katherm QK or Katherm HK
Article no.:
194000145952
Differential pressure-independent valve kit
Connection 1/2'', Max. operating pressure 10 bar, supplied separately
Suitable for: DN 15
Suitable for: DN 15
Article no.:
194000347914
Differential pressure-independent valve kit
Connection 1/2'', Max. operating pressure 10 bar, supplied separately
Suitable for: DN 15
Suitable for: DN 15
Article no.:
194000347913
Mitred corners
Mitred corner
Aluminium, natural anodised, 90 degrees, Bar depth 5 mm, Bar height 18 mm, Bar spacing 9 mm, Free area, approx. 65 %
Suitable for: Katherm NK
Suitable for: Katherm NK
Article no.:
194000145516
Mitred corner
Aluminium, natural anodised, other angles, Bar depth 5 mm, Bar height 18 mm, Bar spacing 9 mm, Free area, approx. 65 %
Suitable for: Katherm NK
Suitable for: Katherm NK
Article no.:
194000145616
Installation covers
Installation cover
to protect trench during installation, factory-fitted, grilles are packed separately
price per m
Suitable for: Katherm NK
price per m
Suitable for: Katherm NK
Article no.:
194000100918
Downloads
Declarations/Certificates
Certificate ISO 50001:2018
PDF
(194 kB)
Certificate ISO 9001:2008
PDF
(118 kB)
Digital EPD database Katherm NK
EPD Katherm NK
PDF
(2.6 MB)
EU Declaration of Conformity for Katherm NK, Katherm QL, Katherm ID
PDF
(457 kB)
UKCA Declaration Katherm NK, QL
PDF
(388 kB)
Cross-product information
Products
PDF
(10.7 MB)
Information sheet trench heating BS EN 16430 UK version
PDF
(215 kB)
Manuals
Katherm NK trench heating
PDF
(2.1 MB)
Katherm NK trench heating
PDF
(3.3 MB)
Installation plans
Katherm NK, electromechanical control
PDF
(558 kB)
Technical catalogues
Katherm NK trench heating
PDF
(12.4 MB)
Katherm NK trench heating
PDF
(8.2 MB)
BIM data (Building Information Modeling)
Kampmann Group BIM data
CAD-Drawings
Katherm NK, trench width 182 mm, trench height 92 mm, cross sections, views
PDF
(64 kB)
Katherm NK, trench width 182 mm, trench height 92 mm, cross sections, views
DXF
(897 kB)
Katherm NK, trench width 182 mm, trench height 92 mm, cross sections, views
DWG
(254 kB)
Katherm NK, trench width 182 mm, trench heights 92/120 mm, trench lengths 800 - 3200 mm, top views
PDF
(83 kB)
Katherm NK, trench width 182 mm, trench heights 92/120 mm, trench lengths 800 - 3200 mm, top views
DWG
(201 kB)
Katherm NK, trench width 182 mm, trench heights 92/120 mm, trench lengths 800 - 3200 mm, top views
DXF
(3.5 MB)