Unit Heaters
TOP C
Article no.:
153001443058C1
Overview
- Self-priming, fixed to the hose connector for the on-site condensate pressurised line
- Electromagnetically working pump, energy-saving and quiet with a delivery height of up to 8 m
- Fully connected, easily accessible float switch below the condensate tray
- With alarm contact for on-site evaluation
- Copper/aluminium heat exchanger, especially lightweight, with high heat outputs from minimal dimensions
- Suitable for low temperature heating systems and LPHW heating systems
- Steel distributor and collector
- Not suitable for steam and thermal oil
- Hollow copper tubes with aluminium fins, connected by expanded pipes, perfect for lasting heat transfer
- Cannot be used in areas with high levels of dust or oil in which extensive cleaning is needed
- Continuously variable EC single-phase whisper-quiet sickle-blade fan (see Fig.)
- Highly efficient due to the aerodynamic design of the rotor housing
- Motor protection class IP 54
- Balanced according to DIN ISO 21940-11 and according to ISO 14694 for the corresponding fan category, external rotor motor integrated in the fan impeller
- External rotor motor integrated in the fan impeller
- Complies with Directive (EU) 327/2011 (“LOT 11”)
Accessories
Control accessories KaControl
KaController
with one-button operation, 24 V wall-mounted room control unit, with integral room temperature sensor, Protection class IP 30, Temperature setting range 8 - 35 °C, Colour similar to RAL 9010 pure white, made of resistant PVC, Type 3210001
Suitable for: all units with control option KaControl -C1
Suitable for: all units with control option KaControl -C1
Article no.:
196003210001
KaController
with one-button operation, 24 V wall-mounted room control unit, with integral room temperature sensor, Protection class IP 30, Temperature setting range 8 - 35 °C, Colour similar to RAL 9017 traffic black, made of resistant PVC, Type 3210006
Suitable for: all units with control option KaControl -C1
Suitable for: all units with control option KaControl -C1
Article no.:
196003210006
KaController
with side operating keys, 24 V wall-mounted room control unit, with integral room temperature sensor, Protection class IP 30, Temperature setting range 8 - 35 °C, Colour similar to RAL 9010 pure white, made of resistant PVC, Type 3210002
Suitable for: all units with control option KaControl -C1
Suitable for: all units with control option KaControl -C1
Article no.:
196003210002
Industry KaController
industrial housing with hinged transparent cover, lockable, with side operating keys, Surface-mounted, Protection class IP 65, Colour grey, made of plastic, Type 3214002
Suitable for: all units with control option KaControl -C1, ProtecTor Door Air Curtains
Suitable for: all units with control option KaControl -C1, ProtecTor Door Air Curtains
Article no.:
196003214002
Room temperature sensor
Wall-mounted, Surface-mounted, Protection class IP 30, Colour similar to RAL 9010 pure white, made of plastic, Type 3250110
Is the KaController installation site suitable for a temperature measurement? - If it is not suitable, e.g. behind a curtain, then a KaControl room temperature sensor should be chosen for each group!
Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*
Is the KaController installation site suitable for a temperature measurement? - If it is not suitable, e.g. behind a curtain, then a KaControl room temperature sensor should be chosen for each group!
Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*
Article no.:
196003250110
Outside temperature sensor/industrial temperature sensor
Surface-mounted, Protection class IP 65, Colour similar to RAL 9010 pure white, Type 3250112
Suitable for: all units with control option KaControl -C1, ProtecTor Door Air Curtains
Suitable for: all units with control option KaControl -C1, ProtecTor Door Air Curtains
Article no.:
196003250112
Clip-on pipe sensor
to detect the medium temperature, Protection class IP 67, Temperature setting range -20 - 70 °C, Colour black, Type 3250115
Is there a risk of frost, e.g. due to the ingress of cold air – if so, then a KaControl clip-on pipe sensor should be chosen for each unit!
heating/cooling changeover function only in conjunction with 3-way valve!
Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*
Is there a risk of frost, e.g. due to the ingress of cold air – if so, then a KaControl clip-on pipe sensor should be chosen for each unit!
heating/cooling changeover function only in conjunction with 3-way valve!
Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*
Article no.:
196003250115
Serial KNX card
for integration into a KNX/EIB network, interface PCOS00KXN0, Type 3260702
The communication card slots into the free interface on the PCB.
Suitable for: all units with control option KaControl -C1
The communication card slots into the free interface on the PCB.
Suitable for: all units with control option KaControl -C1
Article no.:
196003260702
Serial CANbus card
to increase the number of units in a single-circuit system from 7 to a maximum of 30 units, one required per unit, Extension of the cable length from the first to the last unit from 30 m to 500 m, Can only be used with the KaControl -C1 control version!The room temperature cannot be recorded by a room sensor when using CanBus cards., Type 3260301
Suitable for: all units with control option KaControl -C1
Suitable for: all units with control option KaControl -C1
Article no.:
196003260301
Serial Modbus card
Type 3260101
Required for each device for connection to KaControl panels or on-site Modbus networks.
The communication card slots into the free interface on the PCB.
Suitable for: all units with control option KaControl -C1
Required for each device for connection to KaControl panels or on-site Modbus networks.
The communication card slots into the free interface on the PCB.
Suitable for: all units with control option KaControl -C1
Article no.:
196003260101
Valves
Thermoelectric shut-off valve
as an angled valve with angled screw connection and thermoelectric actuator 24 V AC/DC / 50 Hz, 24 V AC/DC, Connection 1'', kvs value 3.3 m³/h, Max. operating pressure 10 bar, Type 30931
Only in conjunction with a KaControl controller!
Only in conjunction with a KaControl controller!
Article no.:
196000030931
Control shut-off valve
24 V AC/DC, for automatic flow and temperature control, Connection 1'', kvs value 3.1 m³/h, Max. operating pressure 25 bar, Type 30980
Suitable for: Model size 4 - 5, TOP or Ultra Unit Heaters, Flow volume Cooling (min./max.) 250 - 1800 l/h, DN 20
Suitable for: Model size 4 - 5, TOP or Ultra Unit Heaters, Flow volume Cooling (min./max.) 250 - 1800 l/h, DN 20
Article no.:
196000030980
Control shut-off valve
24 V AC/DC, for automatic flow and temperature control, Connection 1'', kvs value 4.1 m³/h, Max. operating pressure 25 bar, Type 30981
Suitable for: Model size 4 - 6, TOP or Ultra Unit Heaters, Flow volume Cooling (min./max.) 400 - 2500 l/h, DN 25
Suitable for: Model size 4 - 6, TOP or Ultra Unit Heaters, Flow volume Cooling (min./max.) 400 - 2500 l/h, DN 25
Article no.:
196000030981
Unit heater shut-off set, angled version
Connection 1'', Max. operating pressure 10 bar, Type 34976
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034976
Unit heater shut-off set, straight version
Connection 1'', Max. operating pressure 10 bar, Type 34977
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034977
Air outlets
calculation-relevant accessory
Louvre
two-row for wall- and ceiling-mounted units
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034002
Induction air outlet louvre
calculation-relevant accessory
mainly used for wall-mounted units, for ceiling-mounted units with ceiling heights of more than 4.0 m
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034101
Brackets
Wall brackets
recirculating air only, made of sendzimir galvanised sheet steel for wall mounting, a complete set
TIP and TOP unit heaters can be installed standing and also suspended.
price for 1 complete set
Suitable for: Model size 4
TIP and TOP unit heaters can be installed standing and also suspended.
price for 1 complete set
Suitable for: Model size 4
Article no.:
198000034044
Services
Surcharge for powder-coating
Unit heater housing, powder coated Colour RAL 9016 traffic-white or RAL 7035 grey
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034040
Downloads
Declarations/Certificates
Certificate ISO 50001:2018
PDF
(194 kB)
Certificate ISO 9001:2008
PDF
(118 kB)
UKCA Declaration Unit Heater
PDF
(450 kB)
ErP Data Sheet for TOP unit heaters
PDF
(234 kB)
Cross-product information
Products
PDF
(10.7 MB)
Manuals
TOP unit heaters
PDF
(7.7 MB)
CAD-Drawings
TOP C unit heater, size 4 - 7, copper/aluminium heat exchanger [inch]
PDF
(219 kB)
TOP C unit heater, size 4 - 7, copper/aluminium heat exchanger [mm]
PDF
(223 kB)
TOP C Lufterhitzer, Baugröße 44 - 47, Wärmetauscher Kupfer/Aluminium [Inch]
DWG
(507 kB)
TOP C Lufterhitzer, Baugröße 44 - 47, Wärmetauscher Kupfer/Aluminium [mm]
DWG
(507 kB)