Fan Coils

KaDeck

Article no.: 326116262111C1

Use the dropdown menus to quickly and simply adapt the figures to your requirements.

Overview

Either suitable for 600 x 600 or 625 x 625 mm ceiling grid
RAL 9016 (traffic white) ceiling panel and frame, customised colour on request
Ceiling panel can be opened without tools, industrial-quality hinges and closures for an extremely long service life
Internal cleanable ISO Coarse air filter to protect the internal components from dust

Rigidity and strength, thanks to galvanised steel frame
Thermal and acoustic isolation by foamed EPP carcass free of heat bridges
Organic internal forms for ease of cleaning

Complete with ceiling panel that can be opened without the need for tools and condensate tray
No additional on-site maintenance access openings are required
All components can be accessed once the condensate tray has been removed.
Easy cleaning of all surfaces along which air flows
Valve installation (adjustable 2-way or differential pressure-independent) within the housing

Condensate tray can be removed without tools for cleaning and maintenance
Made of EPP for thermal and acoustic isolation
Section that carries condensate consists of an ABS plastic tray resistant to disinfectant
Gradient on all sides for fast and residue-free condensate drainage from the section through which air flows

Primary air can be introduced throughthe KaDeck
Two nozzles can be connected on each head side
Easy removal of the EPP closures, insertion of optional connection spigots for on-site primary air supply
Primary air is directed through the heat exchanger for temperature control

Noise-optimised, smooth-running three-wire, continuously variable and energy-saving EC motor
Tangential roller sitting in CFD aerodynamically optimised EPP/aluminium contour
Utility model-protected bypass motor cooling to prevent the build-up of heat in heating mode to increase the motor’s service life by 40%

Ceiling-mounted frame optionally available as an accessory
For a visually clean view of the unit
Whether connected from the top or side a wide range of versions available for every application
No adverse impact on output
Simple assembly

Unit design and component selection optimised for ease of assembly and operation
Total unit weight reduced to 60% compared to a steel sheet design, for ceiling installation gentle on the back
EPP connection areas, with supply/return, primary air labelled
The electrical connection is easily accessible on one side; all components are pre-wired
The cables are firmly inserted via pre-assembled PG screw connections and routed in the KaDeck along predefined cable paths

Includes the following in the wet cooling configuration scope of delivery
Compact design, without separate float, prevents possible leaks at connections.
Extremely smooth-running pump, sound pressure level below 20 dB(A), speed and flow rate adapts to the condensate level in the pump sump
The condensate level is determined by a capacitive sensor, preventing the float switch from sticking
Maximum delivery height up to 6 m
Alarm contact in the event of a malfunction or too high a water level in the condensate tray

Accessories

Control accessories KaControl

KaController

with one-button operation, 24 V, wall-mounted room control unit, with integral room temperature sensor, Protection class IP 30, Temperature setting range 8 - 35 °C, Colour similar to RAL 9010 pure white, made of resistant PVC, Type 3210001

Suitable for: All units with control configuration KaControl C1

Article no.: 196003210001

Details

KaController

with one-button operation, 24 V, wall-mounted room control unit, with integral room temperature sensor, Protection class IP 30, Temperature setting range 8 - 35 °C, Colour similar to RAL 9017 traffic black, made of resistant PVC, Type 3210006

Suitable for: All units with control configuration KaControl C1

Article no.: 196003210006

Details

KaController

with side operating keys, 24 V, wall-mounted room control unit, with integral room temperature sensor, Protection class IP 30, Temperature setting range 8 - 35 °C, Colour similar to RAL 9010 pure white, made of resistant PVC, Type 3210002

Suitable for: All units with control configuration KaControl C1

Article no.: 196003210002

Details

room temperature sensor

Wall-mounted, Surface-mounted, Protection class IP 30, Colour similar to RAL 9010 pure white, made of plastic, Type 3250110
Is the KaController installation site suitable for a temperature measurement? - If it is not suitable, e.g. behind a curtain, then a KaControl room temperature sensor should be chosen for each group!

Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*

Article no.: 196003250110

Details

Clip-on pipe sensor

to detect the medium temperature, Protection class IP 67, Temperature setting range -20 - 70 °C, Colour black, Type 3250115
Is there a risk of frost, e.g. due to the ingress of cold air – if so, then a KaControl clip-on pipe sensor should be chosen for each unit!
heating/cooling changeover function only in conjunction with 3-way valve!

Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*

Article no.: 196003250115

Details

KaControl Tableau SEL4.0

with touch terminal, to monitor and control up to 60 Kampmann secondary air units (maximum 25 groups, maximum 6 units per group), 230 V AC, 30 W, Wall-mounted, Protection class IP 54, Colour RAL 7035 grey, Type 3232223

Suitable for: All units with control configuration KaControl C1 in conjunction with Modbus card Typ3260101

Article no.: 196003232223

Details

Serial KNX card

for integration into a KNX/EIB network, interface PCOS00KXN0, Type 3260702
The communication card slots into the free interface on the PCB.

Suitable for: All units with control configuration KaControl C1

Article no.: 196003260702

Details

Serial CANbus card

to increase the number of units in a single-circuit system from 7 to a maximum of 30 units, one required per unit, Extension of the cable length from the first to the last unit from 30 m to 500 m, Can only be used with the KaControl -C1 control version!The room temperature cannot be recorded by a room sensor when using CanBus cards., Type 3260301

Suitable for: All units with control configuration KaControl C1

Article no.: 196003260301

Details

Serial Modbus card

Type 3260101
Required for each device for connection to KaControl panels or on-site Modbus networks.
The communication card slots into the free interface on the PCB.

Suitable for: All units with control configuration KaControl C1

Article no.: 196003260101

Details

Valve kits

Differential pressure-independent valve kit

Connection R1/2 inch external thread, Cu-DN12, 2-pipe, Return fitting and flexible stainless steel corrugated pipe supply and return, Protection class IP 54, water with glycol <50%, supplied separately

Suitable for: KaDeck Fan Coils, Min. Flow volume 150 l/h, max. Flow volume 1050 l/h, DN 15

Article no.: 326007112020

Details

Differential pressure-independent valve kit

Article no.: 326007112030

Details

Pre-adjustable valve kit

Connection R1/2 inch external thread, Cu-DN12, 2-pipe, Return fitting and flexible stainless steel corrugated pipe supply and return, 2-way valve, pre-settable, Protection class IP 54, water with glycol <50%, supplied separately

Suitable for: KaDeck Fan Coils, DN 15

Article no.: 326007112040

Details

Valve actuators, supplied loose

Valve actuator kit

Drive T, 24 V AC/DC, 2-point, normally closed, 1.5m connecting line-AEH, PVC, VA10N, 1 W, Protection class III, Protection class IP 54, Cable length 0.12 m, supplied separately, made of Polyamide

Suitable for: All units with electro-mechanical control configuration KaControl C1 in conjunction with 2-way valve or differential pressure-independent valve

Article no.: 1960TS8P04050010B

Details

Attachments

Primary air connection spigot

Connection DN 80, for the connection of external primary air

Suitable for: KaDeck Fan Coils

Article no.: 326007010104

Details

Additional colours

Surcharge for RAL standard colour

Price per unit.

Suitable for: KaDeck Fan Coils

Article no.: 326007010011

Details

Surcharge for RAL colour of your choice

Minimum quantity = 7 units per order and colour, The number of units below the minimum quantity must be requested and calculated separately.
Price per unit.

Suitable for: KaDeck Fan Coils

Article no.: 326007010021

Details

Surcharge for change of colour

of the powder-coating to the colour version quoted., The surcharge includes the conversion and cleaning of the powder-coating to the requested colour and will be charged once per project and call-off order.

Suitable for: für KaDeck und KaDeck inkl. U-Rahmen

Article no.: 326007010010

Details

Downloads

Declarations/Certificates

Certificate ISO 50001:2018

PDF (194 kB)

Certificate ISO 9001:2008

PDF (118 kB)

EU Declaration of Conformity KaDeck fan coils (FCU)

PDF (456 kB)

UKCA Declaration KaDeck

PDF (462 kB)

digital EPD database for the KaDeck, two-sided discharge, wet cooling

EPD KaDeck two-sided air outlet, wet cooling

PDF (9.2 MB)

Cross-product information

Products

PDF (10.7 MB)

Technical catalogues

KaControl MC - Multi Connect

PDF (2.2 MB)

KaDeck fan coils (FCU)

PDF (9.9 MB)

Manuals

KaDeck fan coils (FCU)

PDF (7.7 MB)

KaDeck, brief instructions

PDF (4.4 MB)

KaDeck maintenance video

KaDeck assembly video

CAD-Drawings

Fan Coil KaDeck Zwischendecke, Luftauslass einseitig und zweiseitig, Ansicht Wurfweitenvergleich

PDF (421 kB)

Fan Coil KaDeck Zwischendecke, Luftauslass einseitig und zweiseitig, Abmessungen

PDF (606 kB)

Fan Coil KaDeck Zwischendecke, Luftauslass einseitig und zweiseitig, Abmessungen

DWG (1.8 MB)

BIM data (Building Information Modeling)

Kampmann Group BIM data

Installation plans

Verlegepläne KaDeck KaControl

PDF (579 kB)