KaCool W

The units are available in several model sizes to allow the performance to be tailored to requirements. The model size is selected depending on the required thermal output, the air volume flow and the sound requirements of the room. Larger model sizes offer higher performance, but are associated with larger housing dimensions, which must be taken into account when planning the installation situation.

We offer various solutions for the control and regulation of our units, which can be used depending on the application and requirements:

Electromechanical control

This variant is ideal for simple applications. All integrated actuators are factory-wired to terminals and can be connected to our electromechanical accessories such as thermostats or external controllers.

Infrared remote control

Control of the various functions via an infrared remote control.

KaControl MC1

Our comprehensive comfort control offers extended control options for individual rooms or appliance groups. It can be operated either via a touch display or a web interface. Thanks to on-site 0-10 V control or common communication protocols such as Modbus RTU & TCP, BACnet and KNX, this solution is ideal for all BMS applications.

• Mounting height min. 1.7 m
• Mounting height max. 3.5 m
• Ceiling clearance min. 200 mm
• Wall distance min. 200 mm

When operating the unit below the dew point, note the following:

• The maximum delivery height of the condensate pump is 6 m from the lower edge of the unit and must not be exceeded.
• Condensate lines must be ventilated or vented.
• Provide lines with a permanent and continuous gradient (1%). Avoid inclines or so-called "water pockets". Use only fixed lines (no flexible hoses) for horizontal lines.
• Connections and transitions (e.g. from hose to fixed line) must be tightly and mechanically secured, e.g. by the use of hose clamps.
• If a siphon stop device is located at the transition point from the device to the on-site drain, it must be mounted at the highest point of the drainage profile.
• Protect condensate-carrying lines against falling below the dew point, e.g. by means of vapour diffusion-tight insulation.

• Impairment of free air circulation due to e.g. lamps, furniture or shelves
• Obstruction of air intake and air distribution
• Electronic units below the unit
• Inaccessibility for maintenance work

• Complies with the relevant hygiene guideline VDI 6022
• Goal: Ensuring hygienic supply air that is harmless to health
• Applies to common rooms such as workplaces, meeting rooms, break rooms, living rooms, sports facilities and sales rooms.
• With factory-fitted ISO Coarse filter in the intake area.
• Accessibility of all ventilated and water-bearing components for cleaning.

• Considers the environmental impact of the product over its entire life cycle.
• Published as an Environmental Product Declaration (EPD) in accordance with standard EN 15804.
• Available for download at International EPD System.
• Item number-specific life cycle assessment data in the technical data sheets.
• Product is registered in the DGNB Navigator (building product platform).

Serves as proof for certification systems, e.g:

• DGNB (German Sustainable Building Council);
• BREEAM (Building Research Establishment Environmental Assessment Method);
• LEED (Leadership in Energy and Environmental Design).