basic unit

Kampmann Katherm NK trench heater, convector-based ready-to-install heating trenches for installation in the floor. Heat outputs tested in accordance with DIN EN 16430, parts 1 and 2.
Trench chassis made of sendzimir galvanised sheet steel, coated in graphite gray. Height-adjustable mounting brackets on the sides with impact sound insulation; sturdy height adjustment mechanism with impact sound insulation. Includes cross braces to reinforce the trench chassis. With pre-punched connection openings for water supply and return as well as electrical connections, on the room side.
Life Cycle Assessment (LCA) data is published in the form of an EPD according to EN 15804 and is available to download from the International EPD System. Registered in the building products platform DGNB Navigator. GWP (phase A1-A3), kg CO2 Äq.6,05E+01. Further calculations possible online.

Heat exchanger

High-performance heat exchanger made of circular copper pipes with aluminum fins, coated in graphite gray.
With integral bleed option.

System		2-pipe
Max. operating pressure	bar	10
Max. entering water temperature	°C	95
Min. entering water temperature	°C	15

Grille

With frame insert profile, colour-coordinated with the grille. Features standard protective installation cover and frame trim. With a cover plate over the connection area. With double T-profile grille. Connections made of corrosion-proof steel springs with matching spacers.

Configuration

Grille design		Linear grille
Grille finish		Stainless steel, polished
Length	mm	2000
Width	mm	137
Height	mm	92
Bar height	mm	18
Bar depth	mm	6
Bar spacing	mm	10
Free area, approx.	%	65
Weight	kg	14.8

Connection

• left